Follow mercenarymind on Twitter
Make a Custom Form-Fitting Case for Your Tools or Precious Gear with Foam Filler [DIY]
Written by life hacker   
Thursday, 01 September 2011 08:00

Authors: life hacker

Make a Custom Form-Fitting Case for Your Tools or Precious Gear with Foam Filler [DIY]


Cheap foam filler is normally used to fill gaps in homes for weather-proofing and insulation. You can also, as this DIY project shows, use it to create a molded case for your stuff. 

Read more: http://feeds.gawker.com/~r/lifehacker/full/~3/rl0V9-8VBa8/make-a-custom-form+fitting-case-for-your-tools-or-precious-gear-with-foam-filler

Last Updated on Thursday, 01 September 2011 18:38
 
Arduino ~ DC Motor Controller
Written by Administrator   
Monday, 29 August 2011 19:00
Last Updated on Tuesday, 30 August 2011 02:03
 
Arduino SunTracking
Written by Administrator   
Monday, 29 August 2011 16:02
 
Arduino-based Tacit Project assists visually impaired
Written by Dangerus Prototypes   
Tuesday, 23 August 2011 10:11

Authors: Dangerus Prototypes


The Tacit Project from Grathio Labs is developing a wrist mounted sonar assistive device for the visually impaired. The hardware includes Parallax Ping ultrasonic sensors mounted in the glove which send distance measurements to an Arduino. The Arduino then activates small hobby servos to vibrate in the glove to communicate the relative distance to objects.

You can find the schematic and source code for this developing project at the Grathio Labs website.


Last Updated on Thursday, 01 September 2011 01:45
 
UltrasonicRrange Finder /Angle Finder.
Written by Administrator   
Monday, 22 August 2011 19:23
 
<< Start < Prev 1 2 3 4 5 6 7 8 9 10 Next > End >>

Page 6 of 138